Seguidores

jueves, 18 de septiembre de 2014


How To: Felt Raincloud Brooch

As promised - here's a tutorial to make your own sparkly raincloud brooch!

I made mine in two different colourways, one white cloud with pale blue raindrops and one darker, stormy grey cloud with dark blue raindrops:


To make your own clouds you will need:

- a needle, a pin, scissors, and the template at the bottom of this post
- white or grey felt to make the cloud and blue felt to make the raindrops
- thread to match the two colours you choose
- embroidery thread to match your raindrops
- a large needle to sew the embroidery thread
- silver and blue round sequins
- a brooch clasp or safety pin

First, cut out your pattern pieces using the templates provided. Each piece of the brooch is made from a "sandwich" of three felt layers, the middle layer is the smallest so it's hidden when you sew them all together.


Using embroidery thread, sew your small raindrop pieces to your small cloud piece (this structure will be the filling in your sandwich). Knot your thread and make one stitch in one of the raindrops, starting from the bottom and sewing upwards. Then leave a bit of embroidery thread "loose" between your raindrop and cloud so the raindrop can dangle freely, and sew it securely to the cloud. Repeat this for your other two raindrops, hanging your middle drop slightly lower than the others.


Now it's time to add your sequins onto the "front" felt pieces. I used silver sequins on my white/light blue cloud and a mix of silver and blue sequins on my grey/dark blue cloud. You might find it helpful to arrange the sequins on one cloud shape or your paper pattern as a guide and then gradually transfer them to the final shape as you sew. Use three stitches for each sequin, and thread that matches the felt you're sewing them onto.


Take your remaining cloud shape, turn it over and sew a brooch clasp onto the back using a double thickness of matching thread (alternatively you can use a safety pin and a scrap of felt - for info on how to do this please see this post).


Using thread that matches your cloud, sew the back piece (with clasp) onto the middle piece. I used long stitches on the inside (which won't be visible when the brooch is finished) and shorter stitches on the outside (visible on the back of the brooch)


Now it's sandwich-making time. Start with your raindrops - they can be a bit fiddly! Use a couple of small stitches to secure the small middle piece to the plain back piece (as you just did with the cloud), this will make it much easier to sew all three pieces together neatly. Then then add the sequinned front piece to your sandwich and use whip stitch to sew all three layers together. Finish your stitches on the back where they will be less visible.


Finally, put your sequinned cloud shape in place and use whip stitch to sew your cloud sandwich together (again, use matching thread and finish on the back).


Double-click on the image below to view the template & print it. If you print the template at 100% your raincloud will be the same size as mine.


This tutorial is for non commercial use only: you can use it for as many brooches as you like for yourself or as gifts for friends but please don't make any for sale. Please feel free to borrow photos if you want to blog about this project, but remember to credit me and link back to the original source, and do not reproduce my entire tutorial on your site. Thanks!

jueves, 20 de marzo de 2014

Tutorial Posavasos fieltro



This project was inspired by traditional paper snowflakes.


 

It started out as a tutorial for snowflake ornaments, and then when I was making them my mum said "oh, are those coasters?"... so of course I just had to make some snowflake coasters too!

 




To make your snowflakes you will need:

- thin white felt

- black felt

- matching sewing thread

- a sewing needle & sharp sewing scissors / embroidery scissors

- circle templates

- plus narrow black ribbon if you want to make your snowflakes into ornaments



1) Make templates for your snowflakes by drawing around glasses or other small circular things... or use the coaster template provided at the bottom of this post... which will be uploaded as soon as I can remember where I put it last week! (oops!) In the meantime you could draw around a circular coaster you already own.



2) For each snowflake you want to make, cut out one white felt circle. Pin your paper template to the felt and cut around it carefully. Then remove the pins and set the template aside.



3) Fold your circle and cut shapes into it, in the same way you would when making paper snowflakes.The thinner your white felt the better, as you can fold and cut it more easily. I used the white wool blend felt from my shops which folded into quarters with no problem.



I folded each circle into quarters (folding twice), cut the point and then cut simple shapes along each side. Triangles work really well, and your designs don't have to be complicated to look really effective! Then I unfolded it and refolded it along the not-yet-cut sections of felt and cut more shapes along the sides and around the outside edge too. Hopefully if you've ever made a paper snowflake before that will make sense :)

 



4) Pin your finished snowflake onto a piece of black felt. Use white thread to stitch the snowflake onto the black felt... use single stitches wherever you need to hold the snowflake in place.

 







5) Then carefully trim the black felt with a pair of scissors, so you're left with a narrow border of black felt around your white snowflake.



6) Use the black circle you've just cut out as a template to cut a second matching piece of felt.


 







7) If you're making baubles, this is when you need to cut a length of ribbon (about 5inches long), fold it into a loop and and sew the ends in place at the top of your black backing circle. If you're making coasters, you can skip this step.



8) Finally, sew the front and back pieces together with black thread. I used running stitch for this, but you could also use whip stitch or blanket stitch if you prefer.

 
If you're making ornaments, sandwich the ribbon ends between the layers when you sew them together so they're hidden inside your ornament.